This keep works with all of the Superlock range. Simply mount the gate slam plate onto the gate frame when fixing the lock and use the expanding fasteners to fix the keep onto the gate post.
The stainless steel gate restrainer is a safety feature that prevents gates falling in the event of hinge failure. This strong but simple device is essential for swing gates when there is potential for the gate to fail and cause fatal harm to pedestrians and property.
Simply drill a 1/2″ hole into the gate and a corresponding 1/2″ hole into the post, and slot the end stops of the gate restrainer through the holes. The plastic bushes then push into the holes to give a neat finish and to prevent the wire from scratching the gate.
Heavy duty – Strongly constructed from flexible braided stainless steel wire and stainless steel end stops
Easy to fit – Just needs 2x 1/2″ holes
Adaptable – Fits on any box section gate and can easily be retro-fitted
Neat and unobtrusive – The gate restrainer makes a nice finish to any gate of any colour!
Product Code
GRS03 – 1/8″ wire for gates up to 570lb (based on a maximum gate width of 8ft. 2″)* operational length of 8-5/8″
GRS04 – 5/32″ wire for up to 1100lb (based on a maximum gate width of 8ft. 2″)* operational length of 10-7/8″
*Important note – strict installation and usage conditions apply. Some gate configurations will not be made safe using this device, refer to installation guide and test reports for further information.
The gate restrainer is a safety device and it is important you follow the instructions to install it. Please refer to the GRS Specification And Installation Guide.
If you want to see the step-by-step installation guide, view this video.
The double throw weld in latch deadlock combines the convenience of a latch for day-to-day use with the security of a deadlock. Use the handles to operate the latch and the key to throw the deadlock bolt. Weld the lock case into the gate and get the case galvanized and painted with the gate. The lock mechanism simply slides into the case after painting.
Secure – Deadbolt moves 15/16″ with two turns of the key
Adaptable – Latchbolt can be rotated for left or right handed gates
Convenient – Handle and key can be operated from both sides
4 lock case widths available to suit different box section sizes – 1-1/4″, 1-1/2″, 2″ and 2-3/8″.
Accepts standard handle designs (order handles separately)
The double throw weld in deadlock has a simple mechanism and design, which makes it perfect for use on a wide range of gate styles. Weld the lock case into the gate and get the case galvanized and painted with the gate. The lock mechanism simply slides into the case after painting.
Secure – Deadbolt moves 15/16″ with two turns of the key
Adaptable – Square design suits a wide range of gate styles
Convenient – Key can be operated from both sides
4 lock case widths available to suit different box section sizes – 1″, 1-1/4″, 1-1/2″, 2″ and 2-3/8″.
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept All”, you consent to the use of ALL the cookies. However, you may visit "Cookie Settings" to provide a controlled consent.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.